Our range includes:
SKANCLEAT cleats are moulded for strength and rigidity. For use in lighter applications
we offer EKT extruded cleats (see table). Cleats from 110 mm can be supplied with textile reinforcement and cleats from 280 mm with steel reinforcement. Cleats from 280 mm can also be supplied as combi-cleats, i.e. the cleat is subdivided into a base/foot and blade.
We offer Skancleat cleats as separate loose profiles and as cold or hot vulcanised elements on the belt (depending on the application). Other sizes and designs, including heavy-duty block cleats, cleats attached to the belt with screws/bolts, etc., are available on request.
We recommend that the cleat is 10-15 mm lower than the corrugated sidewalls.
Skanflex corrugated sidewalls are available in heights from 40
to 600 mm. The sidewalls are extremely rigid in the transverse direction, which is significant for direct return support. In combination with lateral flexibility and strong resistance to wear-and-tear, the sidewalls are extremely wear-and impact-resistant, ensuring extended belt service life.
We offer Skanflex corrugated sidewalls as separate loose profiles and as cold or hot vulcanised elements on the belt (depending on the application).
Skancross conveyor belts are extremely rigid in the transverse direction. Transverse rigidity is secured by the unique belt design. Standard SBK cross-rigid belting is available with two separate cross-rigid textile members, which are integrated into the belt carcass and cover. The unique design enhances cross rigidity to produce belts that are ideal for use in heavy-duty applications. For lighter applications, we offer the so-called XEM belts, where cross rigidity is achieved by means of monofilament insertions woven into the belt carcass/textiles.
To withstand very heavy loads (where the rigidity in standard belting is insufficient), we offer a cross-rigid belt with special steel cord insertions in the transverse direction. The density and thickness of the steel cords are calculated in accordance with the specific task. These are named XE-SB belts. These are only available with moulded rubber edges.
For extremely heavy loads and very high elevation, we offer cross-rigid belting with special steel cord insertions in both the warp (lengthwise) and the weft (transverse). These belts are named XE-SC belts and are only available with moulded rubber edges. This type of belting has very low elongation (0.25% in the lengthwise direction). Fitting and assembly of steel cord belts must only be performed by specially trained staff using special tools.